| 闭口肋正交异性钢桥面板应力分析 |
| Stress Analysis of Closed ribs Orthotropic Steel Decks |
| 投稿时间：2010-09-25 |
| 中文关键词:正交异性钢桥面板 裂纹 有限元模型 内横隔板 帽孔 |
| 英文关键词:orthotropic steel deck cracks finite element model inner diaphragm plate cope hole |
| 基金项目: |
|
| 摘要点击次数: 1274 |
| 全文下载次数: 1530 |
| 中文摘要: |
| 正交异性钢桥面板在车辆荷载作用下将产生极大的面外弯矩，由于桥面板与纵肋的相对厚度较小，这种面外弯矩将导致较高的弯曲应力进而使构件产生裂纹。用大型有限元分析软件ANSYS对正交异性钢桥面板在板 肋连接处的应力状况进行了数值计算。计算结果表明桥面板应力一般大于纵肋应力，可在横截面加设内横隔板以改善结构受力，同时帽孔尺寸不宜过大，设为25 mm较为合适。 |
| 英文摘要: |
| Orthotropic decks will generate significant out of plane bending moments in the deck plate and rib wall when wheel loads act on it due to the relatively small thickness of both the deck plate and rib wall . This essay numerically calculates the stresses in plate rib area with ANSYS . The results of the calculation show that the surface stresses in the deck plate are much larger than those in the rib wall, and installing an inner diaphragm plate at the cross section will improve the stresses condition of the structure. The size of cope hole should not be too large, and a 25 mm radius would be appropriate. |
| 林茂盛,顾萍,周聪.闭口肋正交异性钢桥面板应力分析[J].石家庄铁道大学学报：自然科学版,2010,(4):32-35,40. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
| 关闭 |